
Manufacturers of horticultural and viticultural Equipment	NETWIZZ	SQUIRREL	OLINET	SADIE	Apple FunPark

50 5 SD (Soft Drive)

5m Platform height 7m Reach

The 50 5 SQUIRREL is the ideal machine for mango or avocado plantations and street tree pruning because of its robust construction and many features.

The 50 5 model is designed primarily for street tree pruning with the following features.

Standard features on 50 5 SQUIRREL include.

	Fully enclosed engine compartment
	Self lubricating replaceable bushes
	Planetary Drive Wheel Hubs
	Powerful Hydraulic System
	High ground clearance
	Genuine Foot Controls SD (Soft Drive)
	Hand Control Options
	Hydraulic Three Speed
	Dual caster wheels
	Safety Throughout
	Heavy duty towing
	Side Swing Cage
	Enclosed Cage
	True all-terrain
	Quiet Engine
	Easy lifting

Planetary Drive Wheel Hubs

DRIVE WHEELS feature a planetary reduction gearbox with an integrated hydraulic motor and incorporate fail safe multi-disc wet brakes which eliminate creep and overrun. Hubs are quick disengage freewheeling.

Fully enclosed engine compartment

SQUIRREL 50 5, 65 5 & 80 5 all have a spacious fully enclosed lockable engine compartment providing ample room to service a range of engines, air compressors and air receivers. The engine compartment bonnets have gas struts to assist opening. A large removable fuel tank allows off-site refueling and increased security.

Quiet Engine

Engine is petrol driven, electric with back-up rope start and heavy duty starter solenoid. The engine base is supported on compression springs which eliminate vibration. An additional muffler is fitted, ensuring a quiet, pleasant working environment.

Powerful Hydraulic System

Hydraulics have the capacity to handle steep and adverse conditions. The system is protected by a very fine 10 micron suction filter. The steel braid hydraulic hoses are fitted with spring guards to ensure long life.

High ground clearance

SQUIRREL 50 5, 65 5 & 80 5 all have a high ground clearance allowing the unit to drive over large branches and prunings without fouling.

Hydraulic Three Speed

Three speed is a standard feature which operates independently from the variable engine rpm, enabling the operator to select a wide range of speeds for faster operation and traveling.

Dual caster wheels

Two independent large diameter caster wheels with an additional horizontal pivot provide a very smooth ride over uneven terrain or street kerbs. As one wheel mounts a kerb the other stays at the original level. Effectively the height of the kerb is halved. This allows the operator to comfortably work safely and quickly. These wheels also greatly reduce the possibility of bogging because of their independent rolling action. Standard on 50 5 & 65 5 models. Horizontal pivot has a large self lubricating replaceable bush.

Safety Throughout

SQUIRREL is recognised for its robust heavy construction and Standard Safety Features which Include.

Audible Slope Alarm - multi-height, speed & slope sensitive

Audible Un-safe Speed Movement Alarm

Emergency Stop at Ground and Cage

Dual Cage Entry System

Fail Safe Foot controls to AS Standards

Fail Safe Traveling and Parking Brakes

Cage gate has double lock mechanism

Safety Harness Anchor Point in Cage

All Hand Controls Fully Guarded

All pivot pins easy to remove or replace - boom, stabilizer bar, cage & caster wheel

Extensive Clear Documentation Includes -

	Owners Manual & Parts list
	Maintenance Check-list
	Operator Induction Check-list
	Pre-operation Check-list.

Each machine is rigorously tested prior to delivery. Design is approved by WorkSafe WA and other states to Australian Standard AS1418.10. The 505 Squirrel is approved for 15º forward & back slopes and 7.5º sideways at full height (5m), increasing to 25º slopes at 1m height

Heavy duty towing

A long heavy duty draw bar with ball hitch is a standard component on the SQUIRRELs. This draw bar is stored inside the engine compartment when not in use. The long draw bar and large diameter caster wheels provides smooth safe towing. For long distance transport it is recommended that the SQUIRREL be transported on a trailer - due to excessive tyre wear and legal speed limitations.

Easy lifting

A single lift point is standard on all 50 5, 65 5 and 80 5 models. It provides simple, very safe and balanced lifting for articulated front-end loaders or cranes to load and unload from trucks.

True all-terrain

All models are true all-terrain machines. Each SQUIRREL has evenly spaced and loaded large diameter drive and caster wheels with a powerful two speed hydraulic system enabling them to negotiate undulating terrain.

Genuine Foot Controls

The SQUIRREL is a machine with unique foot controls, giving three dimensional movement without the operator shifting his feet. A wide seat belt holds the operator directly above the foot pedals giving a safe and comfortable working position. The fully adjustable spring centered foot pedals allow you to continue working with both hands free AT ALL TIMES. This proven feature alone makes the SQUIRREL the most efficient machine.

All New SD (Soft Drive)Foot Controls reduce foot pressure by 50%.

No more jerky starting & stopping making the squirrel very easy to operate.

For more information on cage & foot controls click picture on right or left.

For more information on Optional Extras click on the appropriate picture below

OPTIONAL EXTRAS

Air Compressors

Air Chain saws

Multiple crate holder

Picking Bags

Diesel engine

Hand control cage

T

Standard 50 5 SPECIFICATIONS

Max. Cage floor height:    5m
Safe working load:   150 kg
Max. Cage side swing:   60º left through to 60º right
Cage overhang: Max 2.3m Full Height 0.5m
Engine: 14 HP twin cylinder overhead valve petrol engine (20 HP when 30 cfm compressor fitted) (19 HP Diesel available). Heavy duty electric start with back up rope recoil. Oil alert and pressurised filtered lube. Removable 26lt fuel tank. Other engines available on request.
Hydraulics: 10 micron suction filter to tandem gear pump to direct operating foot valves to anti-overrun valve, to Geroler hydraulic motor to fail-safe variable speed hydraulic wet-disc brake to planetary reduction gearbox.
Ground speed: First 0-2.5.kph : Second 0-3.5.kph, Third 0-6kph
Tyres:   Drive - 26 x 1200 x 12 x 8 ply tractor grip (diamond block available on request) , Caster -215 x 14
Rear machine height:   1.9m
Width drive wheels:   2.3m
Weight STD Model:   Approx 1.5 tonne
Length:   4.54m
Ground clearance: .44m

Disclaimer : The pictures and information are a guide only. Specifications are subject to change without notice and without liability expressed or implied.

50 5 SD (Soft Drive)