Air Compressor - 8 cfm

If using air secateurs for pruning an 8cfm  is recommended.

8.2cfm compressor:  cast iron piston air pump; single stage with head unloader valve;145 psi max. Quality made, heavy cast iron flywheel, ball bearings on crank shaft ends, slow RPM, stainless steel valves, steel intake filter with paper air cleaner element, good quality oil level sighter & spring loaded ball sump breather,

The compressor is mounted on a pivoting base for simple, fast V Belt adjustment. Head  are standard

Air Compressor - 13 cfm

If using an air chain saw for interment small pruning an 13cfm is recommended.

13cfm compressor:  cast iron piston air pump; single stage with head unloader valve;145 psi max. Quality made, heavy cast iron flywheel, ball bearings on crank shaft ends, slow RPM, stainless steel valves, steel intake filter with paper air cleaner element, good quality oil level sighter & spring loaded ball sump breather,

This comes with a large capacity air tank and lubricator. The compressor is mounted on a pivoting base for simple, fast V Belt adjustment.    

Air Compressor - 22 cfm

If using an air chain saw for pruning an 22cfm is recommended.

22cfm compressor:  cast iron piston air pump; single stage with head unloader valve;145 psi max. Quality made, heavy cast iron flywheel, ball bearings on crank shaft ends, slow RPM, stainless steel valves, steel intake filter with paper air cleaner element, good quality oil level sighter & spring loaded ball sump breather,

This comes with a large capacity air tank and lubricator. The compressor is mounted on a pivoting base for simple, fast V Belt adjustment.    

Air Compressor - 30 cfm

If using an air chain saw for continuous or street tree pruning a 30 cfm two stage heavy duty cast iron compressor with head unloading valves is recommended. With this option the engine is upgraded from a 14HP to 20 HP and is fitted with a large capacity air tank and lubricator. The compressor is mounted on a pivoting base for simple, fast V Belt adjustment.

Air Chain saw & bar/dip rack

Air operated chain saws are lightweight and are an efficient tool for cutting branches up to 120mm in diameter. They come in pistol grip or with telescopic extensions. It is recommended that a bar/dip rack is used in conjunction with a saw. The chain saw bar is immersed in oil which ensures effective lubrication of the chain. Bar dip/racks are available in standard or fibreglass coated for low voltage insulated applications.

Multiple crate holder

Picking Bag - Standard

Picking Bag - Deluxe

Dual drive wheels

Tail lights

Amber flashing Beacon light

Hydraulic wheel shift

Two man cage

Two man cage with hand controls provides ample room for two people. Three tool trays are incorporated into the front & rear of the cage. This is ideal for hire fleets and construction work. The cage hydraulically rotates 45º left and 45º right. Controls are directly mounted, allowing the operator to phase all movements. This option is available only on 80 5 Squirrel.

One man cage

Low voltage insulation

Lombardini diesel engine 12hp,  for 355 SD Squirrels

The Lombardini 15LD 500 1 cylinder air cooled diesel engine provides a reliable, efficient alternative to petrol for most applications and has low vibration levels for maximum operator comfort. 

The Lombardini 15LD 500 has Direct injection,  Forced lubrication with oil pump,  Built in full flow oil filter, Automatic extra fuel starting device,  Self bleeding fuel system,  Automatic compression release,  Hydraulic tappets,  Cast iron cylinder liners,  Internal dynamic balancer,  Low oil pressure shut down,  Key switch panel with alt & oil lights,  Electric start with back up rope recoil,

Lombardini diesel engine 19hp,  for 505, 655 & 805 SD Squirrels

The Lombardini 25LD 425/2  2 cylinder air cooled diesel engine provides a reliable, efficient alternative to petrol for most applications and has low noise & vibration levels for maximum operator comfort. 

The Lombardini 25LD 425/2 has Direct injection,  Forced lubrication with oil pump,   external oil filter, Automatic extra fuel starting device,  Self bleeding fuel system,  Automatic compression release,  Hydraulic tappets,  Oil coiler, Cast iron cylinder liners,  Internal dynamic balancer,  Low oil pressure shut down,  Key switch panel with alt & oil lights,  Electric start with back up rope recoil.  Efficient alternative to petrol for heavy duty applications and has low vibration levels for maximum operator comfort. Recommended for street tree pruning & 30FCM air compressor.