Manufacturers of horticultural and viticultural Equipment

NETWIZZ

SQUIRREL

 OLINET

SADIE

 

Bin Runner

The Bin Runner is a very versatile trailer, capable of picking up, transporting smoothly and unloading bins fast and efficiently.

To pick up bins in the orchard the Bin Runner is lowered and aligned so that the frame slides under the bin. Chains move the bin forwards while the Bin Runner is reversing. 

Unloading is even easier. Bin Runner is lowered and then driven forward while the chains are moving backwards, gently unloading. 
 

The new strong floor chains have a rounded top and do not damage or chafe the wood or plastic bins.
 

 


Transporting of bins is very gentle (even on rough roads) because of the smooth ride given by the rocking tandem axles.  These rocker wheel pivots now have self lubricating polyethylene bushes.

 

Bin guides now full length & adjustable in with and attached to main chassis line bin centrally whilst loading.  The axle assembly can be unbolted from the frame to allow compact transport.

 


The Bin Runner has large skids which aide easy pick up of bins on soft ground while the chains remain clean.  Also prevents damage to hot-mix while loading & unloading.

 

Two powered bin latches prevent bins from slipping off while loading or transporting.  When unloading, these latches are automatically disengaged.

 

Bin Runner is highly manoeuvrable when mounted to the front of the tractor, which is the standard set-up for use in orchard conditions. Headlands only need to be 7 metres clear to enable Bin Runner to efficiently pick up bins. 

 

Bin Runner is proven to be a cost efficient because the one unit picks bins up from the packing shed, distributes them in the orchard and then returns to the packing shed with full bins even with distances of 2km to travel it eliminates the need for trucks, tractor forklifts and tractor with 3PL forks.

SPECIFICATIONS

bulletTotal Length - 7.5m (for long distance transport 7m)
bulletOverall Width - 1.83m (for long distance transport 1.15m)
bulletTyres - 4 x 205 70/14" new
bulletBin Capacity - 5 x 700kg bins  (with a fork spacing greater than 665mm & no cross boards on the very bottom)
bulletHydraulic Requirements - 2 pairs of remotes; 2,200 psi 4 gpm (min)

Disclaimer : The pictures and information are a guide only.  Specifications are subject to change without notice and without liability expressed or implied.

  NETWIZZ  - SQUIRREL - TREL-PICK - SADIE - OLINET - ROLL WRAPPER - ROCK & STICK DIGGER - BIN RUNNER - TWO BIN TRAILER - BIN TRAILER STD -
ORCHARD BOOM SPRAY - POWER WIRE WINDER -  DEALERS -  ENGINE & COMPRESSORS - LOCATION MAP - HOME
Contact Information for CRENDON MACHINERY
Telephone               (Australia)  Toll Free 1300 761 922  (Australia)  08 97311502    (International)  61 8 97311502
Fax                          (Australia)  08 97311657    (International)  61 8 97311657 
Electronic mail        E-mail info@crendon.com.au
                                Web Site ;  www.crendon.com.au     Copyright © 2008 CRENDON MACHINERY    Last modified: August 03, 2008